Interfaces; Overview - NetModule NB3711 Software Benutzerhandbuch

NB3711
NRSW-Benutzerhandbuch - Version 4.6.0.100

3.4. Interfaces

3.4.1. Overview

Nr. Label
1 LED Indicators
2 Reset
3 SIM 1-4
4 USB
5 Ethernet 1-5
6 Digital I/O
7
8 Power
9 MOB 1
10 MOB 2
Function
LED Indicators for the different interfaces
Reboot and factory reset button
SIM 1-4, they can be assigned dynamically to any modem by configuration.
USB 2.0 host port, can be used for software/configuration updates.
FastEthernet switch ports, can be used as LAN or WAN interface.
Galvanically isolated digital I/O M12 connector
Earth protection connector, connected to the ground of the power supply
V . If used, connect a yellow-green marked cable with at least 6
GND
copper area. Avoid corrosion and protect the screws against loosening.
Power supply (galvanically isolated)
TNC female connectors for MIMO mobile antenna 1
TNC female connectors for MIMO mobile antenna 2
19
2