Changing Air-Oil Separator; Cleaning Radiator - Comprag DV Serie Bedienungsanleitung

5.5

Changing air-oil separator

5.6

Cleaning radiator

28
The separating component (1) is located
within the separator tank. Open the front
panel in order to change it. Unscrew the
2
bolts (2) and carefully remove the top cap
of the tank. Disconnect hoses if they make
it difficult to remove the cap. Remove the
1
spent separator and install a new one in its
place. Refasten the tank
Fig. 5.5 Changing air-oil separator
In order to access the radiator (1), open the
1
front or right panel. Regularly clean the radi-
ator in order to maintain its cooling efficiency
at an acceptable level. Remove any dirt par-
ticles from the radiator using a fibre brush,
then aim a jet of compressed air at the radia-
tor from the bottom to the top; the jet should
be held at an approximate 90° angle to the
plane of the radiator.
Fig. 5.6 Cleaning radiator
cap.
Version 1.1