IKEA EFTERSMAK AA-2048766-5 Bedienungsanleitung Seite 13

ENGLISH
Clock function
Use to set a countdown
time. This function has no
MINUTE MIND‐
effect on the operation of
ER
the oven. You can set the
MINUTE MINDER at any
time, also if the oven is
off.
00:00 If you do not set any other
COUNT UP clock function the COUNT
TIMER UP TIMER automatically
monitor how long the
oven works.
The counting starts imme‐
diately when the oven
starts to heat.
The Count Up Timer can‐
not be used with the func‐
tions: DURATION, END.
Setting and changing the time
After the first connection to the mains, wait
until the display shows
flashes.
1. Turn the control knob to set the hours.
2. Press to confirm and set the minutes.
The display shows
"00" flashes.
3. Turn the control knob to set the current
minutes.
4. Press to confirm or the set time of
day will be saved automatically after 5
seconds.
The display shows the new time.
To change the time of day press
and again until the indicator for the time of
day flashes in the display.
Setting the DURATION function
1. Set a heating function. Press
confirm.
2. Press again and again until
to flash.
Application
and "12:00". "12"
and the set hour.
again
to
starts
3. Turn the control knob to set the minutes
and press to confirm. Turn the control
knob to set the hours and press
confirm.
When the set Duration time ends the signal
sounds for 2 minutes.
flash in the display. The oven turns off
automatically.
4. Press any button to stop the signal.
5. Turn the knob for the heating functions
to the off position.
This function is not available for some oven
functions.
Setting the END function
1. Set a heating function. Press
confirm.
2. Press again and again until
to flash.
3. Turn the control knob to set the hours
and press to confirm. Turn the control
knob to set the minutes and press
confirm.
At the set End time the signal sounds for 2
minutes. and time setting flash in the
display. The oven turns off automatically.
4. Press any button to stop the signal.
5. Turn the knob for the heating functions
to the off position.
This function is not available for some oven
functions.
Setting the TIME DELAY function
1. Set a heating function. Press
confirm.
2. Press again and again until
to flash.
3. Turn the control knob to set the minutes
for DURATION time and press
confirm. Turn the control knob to set the
hours for DURATION time and press
to confirm.
The display shows flashing
4. Turn the control knob to set the hours
for END time and press
13
to
and time setting
to
starts
to
to
starts
to
.
to confirm.