Comelit UT1020 Programmieranleitung Seite 8

AUDIO/VIDEO MODULE FOR ULTRA ENTRANCE PANEL, SIMPLEBUS1 AND 2 SYSTEM.
Easy to install and simple to configure, thanks to the smart programming of call buttons.
Twilight sensor for automatic nameplate backlighting switch-off during daylight hours.
Omnidirectional digital microphone and double loudspeaker for high-fidelity audio.
Wide-angle colour video camera (art. UT2010 and UT2020 only, field of vision: 120° horizontal, 90° vertical)
Audio-visual indications for disabled individuals assistance request can be activated via programming.
Facility for 2 call buttons. To be finished with cap, single button or dual button made using aluminium or
professional grade plastic treated to prevent yellowing and dulling.
Adjustment and programming can take place without removing the module.
ULTRA: the new and most technologically advanced entrance panel that is perfectly easy to install.
Available in flush-mounted (10 mm protrusion from the wall) or surface-mounted (just 35 mm protrusion from
the wall) variants.
PROGRAMMING VIA VIP MANAGER
In addition to the basic configurations, this allows full and customised programming:
• setting actions to be carried out upon closure of the RTE input
• assigning a different action to each module button
• setting the execution of several functions when specific events occur. Up to 20 events can be set
• selecting the command that activates the SE output and/or the Relay
INSTALLATION
• System requirements: Min. operating system Windows 7-64bit, min. NET Framework: 4.7.2, min. CPU
2GHz Dual Core, min. RAM 4GB; min. free memory 200MB
• Download the ViP Manager software from the website pro.comelitgroup.com and run the installation file,
following the on-screen instructions
• Connection to the modules
SEARCHING FOR DEVICES TO CONFIGURE
8
Remote NDIS Compatible Interne
Remote NDIS Compatible Internet Sharing De..