Klarstein ATHENA Bedienungsanleitung Seite 25

Installation (Vent outside)
Note: When the range hood and appliance supplied with energy other than
electricity are simultaneously in operation, the negative pressure in the room must be
not exceed 4 Pa (4 x 10
Installation (Vent inside)
If you do not have an outlet to the outside, exhaust pipe is not required and the
installation is similar to the one show in section "Installation (Vent outside)".
Installation
Fix two 4 x 30 mm screws to the wall with dowels. Place the hood body on the two
screws.
-5
Bar).
1
EN
25