Klarstein ATHENA Bedienungsanleitung Seite 27

Attach the expansion pipe to the V-clip as shown below. Fix the exhaust pipe with a
cable tie.
Place the inner chimney on the inner chimney holder. Mount the outer chimney
bracket to the outer chimney using two screws (4 mm x 8 mm). Drill holes in the wall
to fix the outer chimney bracket.
Note: Remember not to overtighten the screws (4 mm x 8 mm). We recommend that
you tighten them loosely so that the height can be easily adjusted later.
4
5
EN
27