Klarstein MARIANA Bedienungsanleitung Seite 22

EN
22
• Lift the cooker hood so that the bracket is above the kitchen cabinet and rests
on it, preventing the cooker hood from falling down.
• Turn the screw clockwise, as shown in the next figure, to lock the bracket in
place. If you want to loosen the bracket, turn the screws counterclockwise.
• Use the ST6x40 mm screws to fix the top bracket to the back of the kitchen
cabinet.
• The ST4x20 mm screws are used to fix the cooker hood to the bracket on the
kitchen cabinet.
Note: The extendable exhaust pipe is not included in the scope of delivery, but
is an optional accessory. Peel off the protective foil before installation.