Maintenance; Daily, By A Trained Operator; Every 25,000 Loaves And/Or At Least Once A Year, By An Approved Agent; Blade Replacement - JAC Varia Pro Übersetzung Der Originalanleitung

8

MAINTENANCE

8.1

Daily, by a trained operator.

A. Check whether you need to empty the crumb tray (NB: don't forget to lock the door with the
key) (fig.1, n°8).
B. Clean the tables (fig.3, n°15, 17) using a brush.
C. Clean the optical sensor (fig.3, n°30).
D. Clean the cover window (fig.1, n°1) by placing it in the cleaning position (fig.11).
E. Use a dry cloth to clean the inside.
F. Use a damp cloth to clean the outside.
G. Activate cleaning mode:
With a mechanical keyboard, press the red and green buttons at the same time.
With a touch screen, press the "brush" symbol in the top right-hand corner.
8.2

Every 25,000 loaves and/or at least once a year, by an approved agent.

A. Remove the plug from the socket (fig.2, n°13).
B. Check the condition of the cutting blade (fig.1, n°2).
C. If you notice a deterioration in cutting quality, the cutting blade must be replaced (JAC part
number: BVSLCA030 in the JAC Spare Parts catalogue).
D. If the blade needs to be replaced, do so in accordance with the blade replacement procedure
(fig.9).
E. Clean with a brush and vacuum the inside of the machine.
Check that your approved agent has recorded his work in your service booklet in order to maintain
your 5-year warranty cover.
8.3

Blade replacement.

(fig.9)
Always wear cut-resistant gloves (EN 388:2003 version B= 5) and safety footwear when replacing the
blade or when working in the vicinity of the blade.
Having ensured that the plug on your machine (fig.2, n°13) has been disconnected from the mains:
Open the door (fig.1, n°10) using the lock (fig.1, n°9).
Remove the crumb tray (fig.1, n°8).
Replace the blade:
A. Unscrew the two spanners located on the left-hand side of the machine (fig.9, n°25).
B. Remove the blade guard (fig.1, n°6) by means of the Allen screws.
C. Unscrew the nut that secures the blade (fig.9, n°26) using the two spanners supplied (fig.9,
n°25).
D. Remove the spacer and replace the blade, taking care to position it correctly on the locator
pins. Replace the spacer.
E. Fit and tighten the new nut supplied with your new blade to lock the blade, using the
spanners supplied. It is important that the new nut be fitted in order to provide optimum
tightening.
Refit the crumb tray and close the door.
Connect your machine to the mains supply; it is now ready.
Check that your approved agent has recorded his work in your service booklet in order to maintain
your 5-year warranty cover.
Please note that your blade can be sharpened; contact your approved agent for further information.
English
12