Use Of The Appliance; Display; Ventilation; Starting-Up And Appliance Management - Novy 3762 Montageanleitung Und Bedienungsanleitung

USE OF THE APPLIANCE

Display

Display Designation
0 Zero
1...9
Booster level
U No pan detection
A Heat accelerator
E Error message
H Residual heat
P Power
Super Power
U Keep warm
II Stop&Go

Ventilation

The cooling system is fully automatic. The cooling fan starts at a low speed when the calories
generated by the electronic system reach a certain level. The ventilation starts its high speed level
when the hob is intensively used. The cooling fan reduces its speed and stops automatically when
the electronic circuit has cooled down enough.

STARTING-UP AND APPLIANCE MANAGEMENT

Before the first use

Clean your hob with a damp cloth, and then dry the surface thoroughly. Do not use detergent
because this can create a blue-tinted colour on the glass surface.

Induction principle

An induction coil is located under each heating zone. When it is working, it produces a variable
electromagnetic field which produces inductive currents in the ferromagnetic bottom plate of the
pan. The result is a heating-up of the pan located on the heating zone.
Of course the pan has to be adapted:

All ferromagnetic pans are recommended (please verify this thanks to a little magnet): cast
iron and steel pans, enamelled pans, stainless-steel pans with ferromagnetic
bottoms,...(see also p. 57 Pan quality)

Are excluded: cupper, pure stainless-steel, aluminium, glass, wood, ceramic, stoneware,...
The induction heating zone adapts automatically to the size of the pan. With a diameter that is too
small, the pan doesn't work. This diameter varies in function of the heating zone diameter.
If the pan is not adapted to the induction hob , the display will show [ U ].

Sensitive touch

Your ceramic hob is equipped with electronic controls with sensitive touch keys. When your finger
presses the key, the corresponding command is activated. This activation is validated by a control
light, a letter or a number in the display and/or a "beep" sound.
In case of normal use, press only one key at a time.
Description
The heating zone is activated.
Selection of the cooking level.
No pan or inadequate pan.
Automatic cooking.
Electronic failure.
The heating zone is hot.
The Power is activated.
The Super Power is activated.
Maintain automatically 42, 70 or 94°C.
The hob is in pause.
52