Advanced Bionics Naida CI Q70 Gebrauchsanweisung Seite 33

To attach an FM Receiver to the ComPilot:
With the ComPilot turned off, hold the
ComPilot in one hand. With the other hand,
align the three FM connector pins with the
Europort on the ComPilot. Take care to ensure
that the FM receiver pins match the size and
orientation of the holes on the ComPilot.
Failure to do so may cause damage to the FM
receiver and/or the ComPilot.
Adjust the program position on the processor or AB myPilot to the desired program for FM use.
3
Reduce volume settings.
4
Turn on the ComPilot.
5
Adjust the volume to the desired level for FM use.
6
To remove an FM receiver:
With the ComPilot turned off, hold the
ComPilot in one hand.
Readjust the program position and volume to their desired settings for non-FM use.
3
For further information regarding FM use, refer to the
32
Naída CI Sound Processor User Guide
1
1
Firmly press the FM receiver into
place on the ComPilot.
With the other hand, gently pull the FM
receiver straight out of the Europort.
Instructions for Use
2
2
included with the FM system.