Attaching The T-Mic 2 Cover; Removing The T-Mic 2 Cover - Advanced Bionics Naida CI Q70 Gebrauchsanweisung

Attaching the T-Mic 2 Cover

Hold the T-Mic 2 Cover in one hand. In
the other hand, hold the T-Mic 2 at the
end that houses the microphone. Align
the bottom of the T-Mic 2 over the
T-Mic 2 Cover.
Once resistance is felt, stop turning.

Removing the T-Mic 2 Cover

Grasp the end of the T-Mic 2 where the
T-Mic 2 Cover is located, in one hand.
Firmly hold the T-Mic 2 microphone
portion in the other hand.
1
3
1
2
Gently turn the T-Mic 2 Cover clockwise
into the T-Mic 2 Cover. Screw until the
parts meet together flush.
2
Turn the hand holding the T-Mic 2 Cover
counter-clockwise to slowly unscrew the
T-Mic 2 Cover from the T-Mic 2.
Naída CI Sound Processor User Guide
19