Superior SONIA Installationsanleitung Seite 10

MILLY - MINA.
- use the screws that retain the deflector (C) to secure the various parts
of the casing.
Fig. 9
LIA.
- Remove the casing by following the instructions in the section
"CASING REMOVAL" of the instruction booklet included with the
product.
LISA.
- Remove the ceramic casing by following the instructions in the
chapter "INSTALLATION" of the casing instruction booklet.
LIA - LISA
INSTALLATION WITH REAR OUTLET.
- Use a set of pliers to remove the knockout (B) on the rear panel of
the stove.
Fig. 10
G
C
LIA - LISA
INSTALLATION WITH SIDE OUTLET.
- Remove the knockout on the side panel (C).
Proceed as follows:
- Use a set of pliers to remove the two air humidifier supports (G).
The two supports (G) are disposable.
a
LIA - LISA - SONIA - MILLY - SEFORA - MINA.
- Fix the top closure (2) with the 4 screws (5) supplied. Face the piece
arrows as shown opposite.
Fig. 11
10
C
DT2034125-01
B
DT2034063-00
2
DT2034126-00
H07031710 / DT2002252 – 04
LIA - LISA
REAR OUTLET (D).
- Fix the fan (1) with the 3 screws (5) supplied.
- Connect the fan outlet with the Ø 75 mm flexible pipe that is not
included with the supply.
RIGHT SIDE OUTLET (E).
- Fix the fan (1) with the 3 screws (5) supplied.
- Connect the fan outlet with the Ø 75 mm flexible pipe that is not
included with the supply.
Fig. 12
SONIA - MILLY - SEFORA - MINA.
- Mount the two seals (8) for the convective airflow compartments by
securing them with the 4 screws (9) supplied.
Fig. 13
9
8
- Thread the Ø 75 mm pipe (not supplied) through the tank seat.
- Connect the fan output (1) to the flexible pipe (E) using a clamp (F).
Fig. 14
1
5
1
1
F
E
D
E
DT2034065-00
DT2034127-00
DT2034128-01