Inhaltsverzeichnis
Werbung
2.8 PC Health Status
Shutdown Temperature
CPU Warning Temperature
FAN Fail Alarm Selectable
Shutdown When FAN Fail
CPU FANEQ Control
- CPU FAN Type
- FanEQ Target Temp.
- FanEQ Temp. Tolerance
- FanEQ Start Control
- FanEQ Stop Control
CPU Temperature
System Temperature
PWM Temperature
CPU FAN Speed
SYS FAN Speed
AUX1 FAN Speed
CPU Core Voltage
DDR2 Voltage
Hyper-Transport Voltage
NB Core Voltage
ATX +12V
F5: Previous Values
Shutdown Temperature
You can set the processor shutdown temperature here. If the processor temperature exceeds
the settings value, system will force to shutdown to protect the processor not overheat.
CPU Warning Temperature
This item lets you select the temperature at which you want the system to send out a warning
message to the PC speakers of when the temperature goes beyond either limit. You can select
the temperatures you want.
FAN Fail Alarm Selectable
This item selects the fan that will be monitored for malfunction.
Shutdown When FAN Fail
When set to [Enabled], the system will be shut down if the fan selected for monitoring is not
running.
CPU FANEQ Control
This item allows you to control the CPU fan speed. When set to [Enabled], the following items
become selectable.
-
CPU FAN Type
This item selects your CPU fan type.
[4 Pin]: Leave this item at its default [4 Pin] setting for connecting a 4-pin cooling fan to the
"CPUFAN1" fan power header.
[3 Pin]: For a 3-pin cooling fan connection, you must configure this item to [3 Pin] in order to
have the speed control function enabled.
A-S78H
Downloaded from
www.Manualslib.com
Phoenix – AwardBIOS CMOS Setup Utility
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F6: Fail-Safe Defaults
manuals search engine
PC Health Status
90°C/194°F
80°C/176°F
Disabled
Disabled
Enabled
4 Pin
50°C/122°F
5°C/ 41°F
80%
50%
42°C/107°F
30°C/100°F
42°C/107°F
3245 RPM
0 RPM
O RPM
1.20 V
1.80 V
1.20 V
1.22 V
12.00 V
F7: Optimized Defaults
Item Help
2-17
Werbung
Inhaltsverzeichnis
