Pkm IN 4-9 Bedienungsanleitung Seite 39

Place your fingertip on he On/Off sensor. Remember there is a safety device to
prevent children from playing with the controls which is deactivated by leaving
your fingertip on the control for three seconds. If the safety sensor is running
or if you use the appliance for the first time, you should deactivate the safety
device first.
Touch the timer sensor if you want to use it for cooking.
Touch the + and – sensors for adjusting the cooking time.
Make sure you touch the sensor corresponding to the ring you wish to use.
Adjust the power of the selected ring by touching the + and – sensors.
If all the rings are turned off, the appliance will stop operating within a few
seconds. An H displays, which rings are still hot.
You can activate the safety sensor whenever you wish by holding your fingertip
on the sensor for three seconds.
If any items are left on the sensors the appliance will beep several times and
then stop operating.
The appliance will automatically stop operating after 2 hours, even if a ring is
still working but the settings were not changed in any way within these 2 hours.
The timer function can merely control one ring at the same time. When the timer
function is activated this is indicated at the power display of the corresponding ring
by an illumination of the display. If you want to cancel the timer function, use the -
sensor to decrease the setting to O.
3. Switching on a ring
Important
4. Timer function
39