Philips HF8420 Bedienungsanleitung Seite 11

1 Press any button to switch on the massager.
Note: If the massager has not been used for more
than 7 days, you can only switch it on by pressing the
+ button.
, The light rings go on.
, The massager starts operating in the default
mode (mode 1) and at the default vibration
speed.
Tip: You can adjust the speed and select a mode you
like once you have familiarised yourself with the options
available.
2 To switch off the massager, press and hold the
mode selection button or the decrease button.
3 Press the mode selection button to adjust
the vibration to your own preference.The
massager has 4 vibration modes:
1 Glow – continuous vibration
2 Wave – a pattern of pulses that rises and falls in
intensity
3 Heartbeat – a steady pulse, like a rapidly beating
heart
4 Thrill – an exciting and intense pulse
4 Press the increase or decrease button one or
more times to adjust the vibration speed of the
massager to your own preference.
The appliance has 5 speed levels.
5 You can hold the massager in different ways.
Experiment to find the most comfortable way
to use the massager.
Tip: For suggestions, consult the enclosed welcome
booklet.
EnglisH
11