Herunterladen Inhalt Inhalt Diese Seite drucken

Display And Error Messages; Guarantee - BOMANN PW 1405 CB Bedienungsanleitung

Fettanalysewaage
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 4
Your personal values are now saved in the selected
memory slot.
A total of 8 memory slots are available. It is therefore
possible to store not only your own personal values but
also those of your family members in seven additional
memory locations.
Determining your Weight, Body Fat and
Body Water Ratio
First save your personal data in a memory slot.
Note: The measurement can only be performed if you
are barefoot. If necessary, wipe the contact surfaces to
improve conduction of the electricity. Place each of your
bare feet on 2 of the 4 contact surfaces.
1. Press the switch-on button
All segments appear briefl y in the display (5); then the
"memory location" display (12) fl ashes.
2. Use the
/
arrow keys to select a memory location.
3. Press the storage button
measurement mode.
The memory location and the height that has
been set appear in the display for a few seconds
before the display changes to "0.0".
4. Place both your feet on the contact surfaces (4) of the
scales.
At fi rst your weight is shown in the display.
Within a few seconds the scales calculate your
body fat and body water ratio automatically.
The display then shows your body fat percentage
("BF" symbol), followed by the body water percen-
tage ("BW" symbol).
Then the LCD display alternates fi ve times
between the values for the body fat and the body
water percentage before switching off automati-
cally.

Display and Error Messages

General
If an error message (Err) appears in the display please
wait until the scales switch off. Then switch them on
again to continue using them.
For a complete reset remove the battery for a moment
and then reconnect it.
Messages
All segments light up simultaneously. This is a check that
Switching
the displays are working correctly.
on
The scales are not positio-
„-----"
ned correctly or the weight
to be measured is too low.
The scales are not
positioned correctly or
„Err"
overloaded.
The battery charge is too low.
„LO"
The calculated body fat % ratio is above the upper limit of
„Err-h"
the measurement range.
The calculated body fat % ratio is below the lower limit of
„Err-l"
the measurement range.
05-PW 1405 CB Innen 33
to switch the device on.
to enter the body fat
Correct operation is not
possible. Place the scales
on a fl at and solid surface.
Place the scales on a fl at
and solid surface.
Is the weight being measu-
red greater than 150kg?
Usage and care tips
Weigh yourself without any clothes or shoes on before
meals and always at the same hour of the day.
The balance rounds off weight to the closest 100 g.
If you weigh yourself twice and two different values
are given, it means that your weight is comprised
between both values.
Do not immerse the balance in water: the electronic
components can be damaged.
Remove the batterie if the balance is not to be used
for a long period of time.
Handle the balance with care, as it is a precise
measuring instrument. Do not drop it or jump on it.
Absolutely no need for maintenance.
Do not load the appliance with more than 150 kg to
avoid damaging the device.
Cleaning
Clean the device with a slightly moist cloth. Make sure
that no humidity or waters seeps into the device!
Do not use abrasive detergents! These can damage
the casing of the device!
Use a commercially sold detergent or soap for clea-
ning.
Dry the device well after cleaning with a dry and soft
cloth.
This device has been tested according to all relevant cur-
rent CE guidelines, such as electromagnetic compatibility
and low voltage directives, and has been constructed in
accordance with the latest safety regulations.
Subject to technical changes without prior notice!

Guarantee

The device supplied by our Company is covered by a
24 month guarantee starting on the date of purchase
(receipt).
During the life of the guarantee any fault of the device or
its accessories *) ascribable to material or manufacturing
defects will be eliminated free of charge by repairing or, at
our discretion, by replacing it. The guarantee services do
not entail an extension of the life of the guarantee nor do
they give rise to any right to a new guarantee!
Proof of the guarantee is provided by the proof of
purchase. Without proof of purchase no free replacement
or repair will be carried out.
If you wish to make a claim under the guarantee please
return the entire machine in the original packaging to
your dealer together with the receipt.
*) Damage to accessories does not mean automatic free
replacement of the whole machine. In such cases please
contact our hotline. Broken glass or breakage of plastic
parts are always subject to a charge.
Defects to consumables or parts subject to wearing
(e.g. motor pistons, kneading blades, drive shafts, spare
remote control, spare toothbrushes, saw blades, etc.) as
well as cleaning, maintenance or the replacement of said
parts are not covered by the guarantee and hence are to
be paid!
33
08.04.2005, 13:03:53 Uhr

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis