Connect Wireless Speakers - Canton Smart Soundbar 10 Kurzanleitung

English
• When assigning the memory keys, all settings available at the time of saving on
Soundbar 10 (e.g. sound settings, volume, etc.) will be saved.
Save playlists from the app „Spotify"
Open your playlist on the app „Spotify" on your (mobile) device and start play-
1
back. Be sure to select Spotify Connect as your connection.
To „save" a playlist, hold down the corresponding memory button 1, 2 or 3 on
2
the Smart-remote or on the keypad of the Soundbar 10 until the corres-
ponding number is shown in the display and no longer flashes.
To recall the saved playlist, briefly press the corresponding button 1, 2 or 3. The
3
tracks from the saved playlist are then automatically played back via the
Soundbar 10.
Note:
• When saving playlists, all settings that are set on Soundbar 10 at the time of
saving (e.g. sound settings, volume, etc.) will be saved.

CONNECT WIRELESS SPEAKERS

The Canton Smart Series offers you the possibility to connect additional Canton
Smart speakers wirelessly to the Soundbar 10. For example, you can connect a wire-
less Subwoofer or a home cinema set with several Soundbox 3 speakers.
By pressing the menu button (M) on the Smart remote control, you can access the
main menu via the On-screen display on your TV screen. In the „Wireless Setup"
menu item, you can select the corresponding Canton Smart speakers and connect
them to Soundbar 10. The detailed operating instructions can be found at:
www.canton.de/manual/soundbar10
Note:
• In a wireless home theater set, Soundbar 10 is always the „master speaker,"
and all other speakers are defined as „slave speakers.
38