Replacing The Doors And Hinges - hanseatic HKGK17455EWDI Gebrauchsanleitung

5. Then reposition the dummy plugs (36)
on the opposite side, and turn them us-
ing a flat-tip screwdriver until the slits are
in a horizontal position.
(37)
6. Reposition the two dummy plugs (37)
on the upper-facing side of the freezer
door (25) on the opposite side.
(30)
(38)
7. Unscrew the hinge pin (38) belonging
to the upper hinge (30) with the help of
pliers, and then re-screw it into the other
side of the hinged plate.
Changing the door hinges
Replacing the doors and
hinges
1. Reinsert the freezer door (25).
(32)
2. Reinsert the middle hinge (31) into the
new position. Pay close attention to
the plastic discs (32). Screw the middle
hinge (31) tight.
3. Replace the fridge door (23) and close it.
(30)
4. Replace the upper hinge (30) and screw
it tight using the screws (29) provided.
5. Check whether the doors are easy to
open and close. You can adjust it slightly
afterwards by rearranging the plastic
discs (32) differently.
Page EN-31
(29)