Modster EASY 800 TRAINER Betriebsanleitung Seite 26

Manual
3. Align the tailplane parallel to the wing.
4. mark the correct position by carefully drawing thin lines on the tail-
plane with a pencil.
5. view of the tailplane after marking from above.
26
MODSTER Easy Trainer 800
6. the bottom view of the tailplane with the foam nose.
7. Now carefully apply glue to the marked areas on the top and bot-
tom.
8. Now slide the tailplane into position in the fuselage. The longer you
wait, the more difficult this will be, because the glue tightens quickly
and becomes thicker.
www.modster.at