Herunterladen Inhalt Inhalt Diese Seite drucken

Num'axes PIE 1010 Gebrauchsanleitung Seite 31

Vorschau ausblenden Andere Handbücher für PIE 1010:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 56
SMTP settings
# PIE 1010 – indice A
if you want to receive the photos in your electronic
mailbox by email
SMTP status
There are 4 SMTP status.
OFF (default setting) : the camera will shut off the SMTP function
800x600 : the camera will send 800x600 pictures
VGA : the camera will send VGA pictures (640x480)
SMS : the camera will send SMS
The camera will capture and store on its SD card high resolution, full
quality images regardless of the setting you choose.
SMTP number/day
0 – 100
You can choose the maximum number of pictures you want the
camera to send within a 24-hour period.
If the device is on Camera mode and you set the SMTP number at
30, it will send up to 30 emails within 24 hours. And then it continues
to capture photos and save them on the SD card. After 24 hours, the
camera will send emails again when it captures photos.
0 = unlimited number of emails
Daily report
OFF, ON
This option will allow you to receive, at a preset time each day, a
report on how many pictures or videos had been taken and the last
picture taken (in Camera mode). The report will also indicate the
battery power level and the SD card remaining capacity.
ON
press OK to choose the time you want the report to be sent
each day.
SMTP settings
Enter
press OK to enter
Auto input - allows you to use pre-programmed parameters. You
will have to select your country and mobile phone network operator.
Enter
press OK
press OK
choose your mobile phone network operator using the
and
keys
press MENU several times to move back
Limited pre-programmed parameters are available in SMTP. You will
have to use the "Manual input" option (see below) to input the
sender's email parameters. Do not hesitate to check the settings with
your mobile phone network operator.
Manual input – allows you to manually enter the SMTP parameters
(APN, Account, Password, SMTP server, Port, Sender email, Send
password).
Note: if you choose to manually input the SMTP parameters, you
choose your country using the
and
keys
31/88

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis