DeWalt DW040 Bedienungsanleitung Seite 44

EN G LI S H
• If your LDM requires repair, contact your local D
authorised service center.
• Do not use optical tools such as a telescope or transit to view
the laser beam. Serious eye injury may result from staring at the
beam.
• Do not place the laser in a position which may cause anyone
to intentionally or unintentionally stare into the laser beam.
Serious eye injury may result from staring at the beam. Whenever
possible, laser beam should be well above or well below eye level.
• Do not position the laser near a reflective surface which may
reflect the laser beam toward anyone's eyes. Serious eye injury
could result.
• Turn the laser off when it is not in use. Leaving the laser on
increases the risk of staring into the laser beam.
• Do not operate the laser around children or allow children
to operate the laser. Serious eye injury may result.
• Do not remove or deface warning labels. If labels are removed
user or others may inadvertently expose themselves to radiation.
• Do not open the device by using tools, such as but not limited
to, screwdrivers, etc.
WARNING: Use of controls or adjustments or
performance of procedures other than those
specified herein may result in hazardous radiation
exposure.
WARNING! DO NOT DISASSEMBLE THE DEVICE.
There are no user serviceable parts inside.
Disassembling this device will void all warranties on
the product. Do not modify the product in any way.
Modifying the tool may result in hazardous laser radiation
exposure.
Additional Safety Instructions for Lasers
• This laser complies with Class 2 according to EN 60825-1:2007.
Do not replace a laser diode with a different type. If damaged,
have the laser repaired by an authorised repair agent.
42
WALT
E