Technical Data - Nordica ROSA 4.0 Benutzerhandbuch

HOw TO SET THE mACHINE TO bOIL wATER
• keep the flue gas register on the cooker function – hOTPLATe use.
• Primary air half open.
• secondary air completely open.
• Load wood as described in the manual (hourly load).
HOw TO SET THE mACHINE TO COOk bISCuITS
• switch the cooker on with a moderate load of wood until the oven thermometer indicates 150 °C.
• wait for 190 – 200 °C to be reached without additional wood being loaded.
• Load a single piece of wood weighing 500 - 600 g one at a time and wait for it to burn completely before adding another.
• This keeps the oven temperature stable around 190 – 200 °C.
• Place the tray of biscuits in the low position for 25-30 minutes (slow cooking) or in the medium position for 15-20 minutes (quick
cooking).
• Turn the tray halfway through cooking, if necessary.

TECHNICAL DATA

Definition in accordance with EN
Constructive system
Nominal power in kw
Efficiency in %
Smoke outlet diameter in mm
chimney height ≥ (m) - dimension (mm)
Chimney draught in Pa (mm h
Hourly consumption in kg/h
CO measured at 13% oxygen in %
Exhaust gas emission in g/s – wood
Exhaust gas temperature in °C - wood
Hearth opening size in mm (w x h)
Hearth size in mm (w x h x D)
Oven size in mm (w x h x D)
Type of grill
Height in mm
width in mm
Depth in mm
weight in kg
fire prevention safety distances
heatable m (30 kcal/h x m
3
(*) The proposed value are indicative. The installation must, in any case, be sized and verified according to the general calculation method in UNI
EN13384-1 or by another method of proven efficiency.
(**) For those buildings in which the thermal insulation does not correspond to the instructions on heat protection, the heating volume of the
product is: favourable type of building (30 kcal/h x m
x m ).
3
with thermal insulation in accordance with the regulations regarding energy saving, the heated volume is greater. with temporary heating, in
the event of interruptions which last more than 8 hours, the heating capacity is reduced by about 25%.
THE DECLARED TECHNICAL DATA HAVE bEEN ACHIEVED bY bURNINg bEECH wOOD CLASS "A1" ACCORDINg TO THE REqUIREMENT UNI EN ISO
17225-5 AND wOOD MOISTURE CONTENT LESS THAN 20%. bY bURNINg A DIFFERENT kIND OF wOOD THE EFFICIENCY OF THE PRODUCT ITSELF
COULD CHANgE AND SOME SPECIFIC ADjUSTMENTS ON THE APPLIANCE COULD bE NEEDED.
28
O)
2
(wood with 20% humidity)
)
3
); less favourable type of building (40 kcal/h x m
3
ROSA 4.0
EN 12815
2
8,4
87,1
150
(*) 4 - 200x200 Ø200
10 (1,0 mm h O)
2
2,3
0,067 - (843 mg/m ) 0,08 - ( 981 mg/m
3
6,6
192
223 x 265
270 x 320 x 362
330 x 300 x 410
851
1030
650
Chapter DImeNsIONs
Chapter fIRe sAfeTy
240 (**)
ENGLISH
ROSETTA bII
ROSETTA SINISTRA bII
EN 12815
2
7,2
82
130
10 (1,0 mm h O) 12 (1,2 mm h
2
2
) 0,07 - ( 875 mg/m
3
7,1
217
209 x 265
230 x 270 x 382 230 x 270 x 382
245 x 300 x 384 245 x 300 x 384
movable - flat
843
885
572
206 (**)
); unfavourable type of building (50 kcal/h
3
EN 12815
1
7,3
80
130
O)
2
2
)
3
6,8
250
209 x 265
843
885
572
209 (**)