Daily Use - AEG FAVORIT 99009 M0P Benutzerinformation

7. DAILY USE

1. Open the water tap.
2. Press the on/off button to activate
the appliance. Make sure that the ap-
pliance is in setting mode, refer
to 'Setting and starting a pro-
gramme'.
• If the salt indicator is on, fill the salt
container.
• If the rinse aid indicator is on, fill
the rinse aid dispenser.
7.1 Using the detergent
A
7.2 Setting and starting a
programme
Starting a programme without
delay start
1. Open the water tap.
2. Press the on/off button to activate
the appliance.
3. Close the appliance door.
4. Set the programme and options
5. Press the start touchpad, the pro-
gramme starts.
• The start of the programme does
not automatically occur if the salt
container and the rinse aid dis-
penser are empty. The related
messages show in the display.
Press the start touchpad again.
Starting a programme with
delay start
1. Set the programme and the options.
B
30
A
20
+ -
C
3. Load the baskets.
4. Add the detergent.
• If you use the combi detergent
tablets, activate the Multitab op-
tion.
5. Set and start the correct programme
for the type of load and the degree
of soil.
1. Press the release button (B) to open
the lid (C).
2. Put the detergent in the compart-
ment (A) .
3. If the programme has a prewash
phase, put a small quantity of deter-
gent on the inner part of the appli-
ance door.
4. If you use detergent tablets, put the
tablet in the compartment (A).
5. Close the lid. Make sure that the re-
lease button locks into position.
2. Set the delay start.
3. Press the start touchpad, the count-
down starts.
• The start of the countdown does
not automatically occur if the salt
container and the rinse aid dis-
penser are empty. The related
messages show in the display.
Press the start touchpad again.
• When the countdown is completed,
the programme starts.
Opening the door while the
appliance operates
If you open the door, the appliance
stops. When you close the door, the ap-
pliance continues from the point of inter-
ruption.
Cancelling the delay start
while the countdown operates
1. Press the start touchpad.
2. The display shows how to operate to
cancel the delay start.
ENGLISH
29