Overload Protection; Residual Risks - Ryobi RLT1038 Übersetzung Der Originalanleitung

MAINTENANCE
After use, disconnect the machine from the
■
mains and check for damage.
Use only genuine replacement parts and
■
accessories.
After extending new cutter line, always
■
return the product to its normal operating
position before switching on.
After each use, clean with a soft dry cloth.
■
Check the product regularly to make sure
■
that it will operate properly and perform the
intended function. Any part that is damaged
should be properly repaired or replaced by
an authorized service centre.
When not in use, the product should be
■
stored in a cool dry place and locked up
out of the reach of children. Do not store
outdoors.
When not in use, store the machine out of
■
the reach of children.

OVERLOAD PROTECTION

The product has an overload protection
device that is activated when overheating or
a current spike occurs, automatically shutting
down power within the product. To resume
operation, disconnect the product from the
power supply, wait for about 15 minutes, and
re-connect the product to the power supply.

RESIDUAL RISKS

It has been reported that vibrations from hand-
held tools may contribute to a condition called
Raynaud's Syndrome in certain individuals.
Symptoms may include tingling, numbness
and blanching of the fi ngers, usually apparent
upon exposure to cold.
Hereditary factors, exposure to cold and
dampness, diet, smoking and work practices
are all thought to contribute to the development
of these symptoms. There are measures that
can be taken by the operator to possibly
reduce the effects of vibration:
Keep your body warm in cold weather.
■
When operating the unit wear gloves
to keep the hands and wrists warm. It is
reported that cold weather is a major factor
contributing to Raynaud's Syndrome.
All manuals and user guides at all-guides.com
■
■
KNOW YOUR PRODUCT
See page 96.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10. Cutting line
11. Bump head
12. Power cord
13. Cord retainer
14. Spool cover
15. Spool
16. Eyelet
ENVIRONMENTAL PROTECTION
SYMBOLS
After each period of operation, exercise to
increase blood circulation.
Take frequent work breaks. Limit the
amount of exposure per day. If you
experience any of the symptoms of this
condition, immediately discontinue use and
see your physician about these symptoms.
Rear handle
On-off switch
Lock-out trigger
Front handle
Harness
Lower shaft
Curved shaft
Grass defl ector
Cut-off blade
Recycle raw materials instead
of disposing of as waste. The
machine, accessories and
packaging should be sorted for
environmental-friendly recycling.
Safety alert
Read and understand all
instructions.
Wear eye protection.
Wear ear protection.
EN
English
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
3