For storage, always disconnect from power
■
supply and wind cable.
PREPARATION
Always wear protective non-slip footwear
■
and long trousers.
Before use, check that there are no
■
damaged parts. A defective switch or any
part that is damaged should be properly
repaired or replaced by an authorized
service facility.
Consider the environment in which you are
■
working. Keep the working area free from
wires, sticks, stones and debris.
Make sure the trimmer head is properly
■
installed and securely fastened.
Make sure all guards, deflectors and
■
handles are properly and securely attached.
OPERATION
Beware, the cutting elements continue to
■
rotate after the motor is switched off.
Keep extension cords away from the
■
cutting elements.
Avoid using machine in bad weather,
■
especially if there is risk of lightning.
Use the product in daylight or good artificial
■
light.
Avoid using on wet grass.
■
Keep proper footing and balance at all
■
times.
Do not walk backwards when trimming.
■
Walk, never run.
■
Keep the trimmer head below waist level.
■
Do not cut on surfaces other than grass on
■
ground.
Never operate the product with damaged
■
guards or without guards in place.
Never fit a metal replacement line.
■
Keep hands and feet away from the cutting
■
means at all times and especially when
switching on the product.
Never pick up or carry the product by the
■
electric cable.
Beware of objects thrown by the cutting
■
line.
2
All manuals and user guides at all-guides.com
■
■
■
■
■
■
■
Injuries may be caused, or aggravated, by
prolonged use of a tool. When using any
tool for prolonged periods, ensure you take
regular breaks.
Inspection after dropping or other impacts:
Thoroughly inspect the product and identify
any affections or damage with it. Any part
that is damaged should be properly repaired
or replaced by an authorised service centre.
■
■
■
Switch off and disconnect from the power
supply before:
servicing
–
leaving the product unattended
–
cleaning the product
–
changing accessories
–
checking for any damage after hitting an
–
object
checking for any damage if the product
–
starts to vibrate abnormally
performing maintenance
–
Wear protective glasses or goggles.
Take care against injury from any device
fitted for trimming the filament line length.
Disconnect the machine from the mains
before checking, cleaning or working on
the machine and when it is not in use.
Always ensure that ventilation openings
are kept clear of debris.
The small blade fitted to the lawn guard
is designed to trim the new extended line
to the correct length for safe and optimum
performance. It is very sharp, do not touch
it particularly when cleaning the tool.
Keep firm footing and balance. Do not
overreach. Overreaching can result in loss
of balance. Always be sure of the footing
on slopes and walk, never run.
WARNING
WARNING
For damaged, loose or broken parts
For loose or damaged fasteners
Handles and hand guards
English