clage Zip HydroTap G4 BCS 100/75 Gebrauchsanleitung Seite 35

LCD Screen operation - Section F
Energy Modes
This mode allows the HydroTap to go into Energy Saving mode. The-
re are two options available: 'Sleep' mode and 'ON/OFF' mode.
In SLEEP MODE the unit will go to "Sleep" after a predetermined
period of inactivity. When the period of inactivity passes, the home
screen status window will show "Sleep Mode".
Option2: "2 Hours
will graduallydrop to room temperature after 2 hours of NO USE
and the boiler and chiller will remain OFF.
Option 3: "Lux Sensor
gradually drop to 68 °C when it's dark. (Refer to Lux sensor calibra-
tion)
Option 4: "Lux Sensor
drop to room temperature gradually when it's dark and the boiler
will remain OFF.
Option 5: "Lux or 2 Hr
ted otherwise Option 1 will be automatically enabled. (Refer to Lux
sensor calibration)
Option 6: "Lux or 2 Hr
drop to room temperature gradually and the boiler will remain OFF.
Option 7: "Disable" - Boiling circuit will be switched ON.
It is recommended to recalibrate the Lux Sensor after selecting any
of the Lux sensor options from the sleep mode menu.
Activate the sleep mode
1. Press the [MENU] button for
2. Press the [Setting] button.
3. Press the [Energy Modes]
4. Press the [Sleep Modes]
Option1: "2 Hours
Boiling water temperature will
gradually drop to 68 °C after 2
hours of NO USE while the chiller
will remain ON.
OFF" - Boiling and Chilled water temperature
68 °C" - Boiling water temperature will
OFF" - Boiling water temperature will
68 °C" - When it is dark Option 3 is activa-
OFF" - Boiling water temperature will
35
main menu.
button.
button then in the next screen,
use the up and down arrow to
select sleep mode from the
7 options.
68 °C" -