clage Zip HydroTap G4 BCS 100/75 Gebrauchsanleitung Seite 22

The safety lock feature is provided to prevent boiling water fl owing
if the hot lever is inadvertently operated.
This function can be activated and deactivated from either the Tap
or from the touch screen display (Located on the Zip HydroTap G4
unit), but only if it is set to allowed in the safety settings.
To allow the safety setting to be changed using the touch screen
1. Press the [MENU] button
for main menu.
2. Press the [Setting] button.
3. Press the [Safety] button.
4. Press button A to allow
the safety setting to be
changed.
To Enable or Disable the safety in the menu
5. Press button B to select Enable / Disable
NOTE: Upon completion all the settings can be protected by dis-al-
lowing any setting changes by selecting [NO] on the menu screen.
For Hot Isolation (see page 37)
To activate the safety (from the tap):
First place a fi nger on the safety lock,
then depress the Blue lever, while keeping
both fi ngers in position for a period of ap-
proximately ten seconds. The safety lock
indicator light will now be illuminated.
To deactivate the safety (from the tap):
First place a fi nger on the safety lock,
then depress the Blue lever, while keeping
both fi ngers in position for a period of ap-
proximately ten seconds. The safety lock
indicator light will now extinguish.
Tap Safety
22
A
B
C
Safety lock