clage Zip HydroTap G4 BCS 100/75 Gebrauchsanleitung Seite 31

LCD Screen operation - Section C
IV. - Booster
This function should only be considered when a Booster unit is
installed.
Note: Failing to make the correct selection for 'Booster' will eff ect
product performance.
V. - CO -Flush
2
1. Press the [MENU] button for main menu.
2. Press the [Install] button.
3. Press the [Filter Reset] button.
4. In the next screen select [START]
5. When only CO2 discharge out of the fi tting, select [STOP]
Air and water inside the carbonizer are fl ushed out with carbon
dioxide to ensure that the carbonizer operates correctly.
VI. - Lux Sensor Calibration
1. Press the [MENU] button for
main menu.
2. Press the [Install] button.
3. Press the [Booster] button.
4. In the next screen, press but-
A
ton to enable the Booster.
5. Dispense boiling water for
30 secs and check the outlet
hose from the Booster is warm.
1. Press the [MENU] button for
main menu.
2. Press the [Install] button.
3. Press the [Lux Sensor Calibra-
tion] button.
4. The lights on the Tap head will
fl ash to confi rm calibration.
31