JUNO JM60170116 Benutzerhandbuch Seite 32

Installing the appliance
4 mm
32
4 mm
4 mm
1. Remove all packaging and check carefully
for any signs of damage.
2. This oven is designed to fit into a 360 mm
high cupboard as standard. When fitting
into a 350 mm high cupboard:- Unscrew
and remove the 4 feet from the bottom of
the oven. There are 3 tall feet and 1 short
foot. Replace the 3 tall feet with those
provided in the accessory pack. Do not
replace the short foot.
3. Fit the fixing hooks to the kitchen
cupboard using the instruction sheet and
template supplied.
4. Fit the appliance into the kitchen cupboard
slowly, and without force. The appliance
should be lifted onto the fixing hooks and
then lowered into place. In the case of
interference during fitting, this hook is
reversible. The front frame of the oven
should seal against the front opening of
the cupboard.
5. Ensure the appliance is stable and not
leaning. Ensure that a 4 mm gap is kept
between the cupboard door above and the
top of the frame (see diagram).