WolfVision VZ-3neo Bedienungsanleitung Seite 26

CODES - Short Keys
One Push White Balance:
Press the LIGHT key (#15) for 2 seconds to perform one push white balance.
Activating the on-screen menu:
Press the MENU key (#21) to activate the on-screen menu. Use the navigation keys (SOURCE #16,
FREEZE #18, PRESET #17and AF #20) to navigate and the MENU / OK key (#21) to confirm. For the help
function, press and hold the MENU / ? key (#21) .
Activating the on-screen Extra menu:
Press and hold the MENU key (#21) until the extra menu appears.
Resetting the output mode to the default of "XGA at 60Hz":
Press and hold the POWER key (#14) for more than 4 se conds.
Storing Preset 1:
Press the PRESET key (#17) on the camera head for 2 seconds.
Recalling Preset 1:
Press the PRESET key (#17) on the camera head quickly.
Focus manually:
Press and hold the AF key (#20) for two seconds. Use the navigation keys up/down (SOURCE #16 /
FREEZE #18) to focus near/far. Use the AF key again to return to normal operation mode.
24