Please Observe The Following - WolfVision VZ-3neo Bedienungsanleitung

Precautions
Dangerous voltage inside

Please observe the following:

Use this Visualizer only with the correct voltage as shown on the type label !
Do not expose the Visualizer to heat or moisture !
Protect the Visualizer from excessive shocks !
Make sure that sufficient air circulation for cooling the Visualizer is possible (ventilation slots at
the back)!
If there is any abnormality (abnormal noise, smell, smoke etc.) disconnect the Visualizer from
mains immediately and contact your Visualizer dealer!
Do not use a damaged power supply / power cord. This may cause short circuits or electrical
shocks!
To prevent danger, do not modify the Visualizer or operate without the cover panel firmly in place!
Do not expose the Visualizer to water, metallic objects or any flammable material.
Avoid installing the Visualizer in locations exposed to strong magnetic fields or electrical
currents.
Avoid installing the Visualizer in environments where there is radiation. This could cause
monitor image distortion or damage to the camera sensor.
Do not pull the plug from the power socket with wet hands!
If the Visualizer is not used for a long time, disconnect it from mains!
The supplied HDMI cable is designed for demo purposes only. Use high quality cable for final
installation.
Use the included 12Vdc power supply. Alternatively, a PoE+ injector can be used (the PoE+
injector has to be certified to IEC/EN/UL/CSA 62368-1 and has to meet the industry standard
IEEE802.3at-2009).
Precautions for LED light according EN62471:
LED lighting system - Do not stare into beam!
Do not modify the LED lighting system!
Do not view the light beam with optical instruments!
Ne pas regarder dans l'objectif lorsque le visualiseur est en marche!
WARNING!
Risk of electric shock
1
ENGLISH