07/2017
1018447-00
–
Insert and tighten the screws
4.7.2
Remove the canopy panel
–
Turn the locks through 90°: first the outer locks, then the lock in the
middle.
–
Support the canopy panel with one hand so that it does not fall down.
–
Carefully lay the canopy panel aside.
The assembly is the same process in reverse order.
When assembling the device please note:
–
Support the canopy panel with one hand so that it does not fall down.
–
Re-lock the locks: first the lock in the middle, then the outer locks.
Cleaning and maintenance
Operating instructions – 47/78