07/2017
1018447-00
–
Screw the lid with the hose onto the new canister.
–
Push the hose well down so that it touches the bottom of the canister.
–
Put the canister back in the device.
–
Close the bed base. You should hear the bed base click into place.
Venting
NOTE:
To ventilate, access to the Professional Setup Manager on
the control panel is required.
–
Go to the Professional Setup Manager.
–
Activate the fill mode in the AQUA FRESH AROMA menu.
–
Close the canopy.
The system will now be ventilated for 60 seconds. The AQUA SYSTEM liquid
will be released from the nozzles during this period.
–
Then test the AQUA SYSTEM in test mode. In test mode, the nozzles
spray for 3 seconds. Repeat the ventilation process if it does not work.
Cleaning and maintenance
Operating instructions – 67/78