Remove The Canopy Panel - ergoline INSPIRATION 500 HYBRID PERFORMANCE Gebrauchsanweisung

Cleaning and maintenance
44/64
4.7.3

Remove the canopy panel

– Turn the locks through 90°: first the outer locks, then the lock in the
middle.
– Support the canopy panel with one hand so that it does not fall down.
– Carefully lay the canopy panel aside.
The canopy panel must be completely removed from the device in order to
replace the lower, long low pressure lamps.
– Undo the cable tie and unplug the connector.
– Remove the canopy panel with the aid of a helper.
When assembling the device please note:
– Carefully lay the canopy panel in the guide.