Kenwood KDC-4754SD Bedienungsanleitung Seite 17

Symptom
"NA DEVICE" appears.
"USB ERROR" appears.
"iPod ERROR" appears.
Noise is generated.
Tracks cannot play back as you have
intended them to play.
"READING" keeps flashing.
Elapsed playing time is not correct.
The number of songs contained in
"SONGS" category of this unit is different
from that contained in "SONGS" category
of iPod.
Correct characters are not displayed (e.g.
album name).
About "KENWOOD Music Editor"
This unit supports the PC application "KENWOOD Music Editor Light ver1.1" or later.
When you use the audio file with database information added by the "KENWOOD Music Editor Light ver1.1," you can
search a file by title, album or artist name using Music Search.
In the Instruction manual, the term "Music Editor Media" is used to mean the device that contains audio files with
database information added with KENWOOD Music Editor.
"KENWOOD Music Editor Light ver1.1" is available from the following web site: www.kenwood.com/cs/ce/
For further information on "KENWOOD Music Editor Light ver1.1," refer to the site above or the application help.
Connect a supported USB device, and check the connections. / Check that the
supported SD card is inserted.
Remove the USB device, turn the unit off, then turn it on again. If the unit still
showing the same display, try to connect another USB device.
Reconnect the iPod. / Reset the iPod.
Skip to another track or change the disc.
Playback order is determined when files are recorded.
Longer readout time is required. Do not use too many hierarchies and folders.
This is caused by how the tracks are recorded.
Podcast files are not counted in this unit as this unit does not support the playback
of podcast files.
This unit can only display letters (upper case), numbers, and a limited number of
symbols. Cyrillic alphabets (upper case) can also be displayed if [RUSSIAN SET] is
set to [ON]. (page 7, 8)
Remedy/Cause
17