Replacing The Fuse; Technical Specifications - EuroLite LED SLS-3 HCL 3x10W floor Bedienungsanleitung

We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no serviceable parts inside the device except for the fuse. Maintenance and service operations are
only to be carried out by authorized dealers.

Replacing the fuse

If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Open the fuseholder on the rear panel with a fitting screwdriver.
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.

TECHNICAL SPECIFICATIONS

Power supply:
Power consumption:
Number of DMX channels:
DMX512 connection:
Sound-control:
Maximum ambient temperature T
Maximum housing temperature T
Min. distance from flammable surfaces:
Min. distance to lighted object:
Fuse:
LED type:
Number of LEDs:
Beam angle:
Dimensions (WxDxH):
Weight:
Accessories:
IEC extension cable, 1m 3x1.0
EUROLITE TH-50S Theatre hook, black
Saveking Safety bond 3x600 black
SOMMER BYCE-2-0300 Binary 234 XLR/XLR
EUROLITE SB-18 Softbag
Please note: All information is subject to change without prior notice. 08.01.2014 ©
100 - 240 V, 50/60 Hz~
24 W
6/7/8/9
3-pin XLR
via built-in microphone
: 45° C
a
(steady state): 50° C
C
0.5 m
0.1 m
T 1 A, 250 V
10 W HCL
3
40°
115 x 210 x 225 mm
2 kg
No.
30235200
58000651
58010252
30307457
30130555
27/27 00080993.DOC, Version 1.0