Slave Mode; Dimmer Mode - EuroLite LED SLS-3 HCL 3x10W floor Bedienungsanleitung

MODE SET UP
SLAVE

Slave mode

MODE
Red dimmer
Green dimmer
Blue dimmer
White dimmer
DIMMER
MODE
Amber dimmer
UV dimmer
Strobe effect
Select program
SOUND
MODE
Sensitivity setting
Color fade setting
AUTO
Color switch setting
RUN
Auto fade
MODE
switch
Speed setting
STATIC Color select
COLOR
Strobe effect
SELECT
MODE
Display
on/off
OTHER
Display
MODE
normal/inverse
Default
Address setting
Channel setting
DMX
MODE
Slave mode
Press the MODE button to select the SLAVE mode. The devices set in this manner (
controlled by the master unit.
Set the Master device to one of the stand alone modes.

Dimmer mode

Press the MODE button to select the dimmer mode. Select the desired color via the SET UP button.
You can select the desired values via the UP or DOWN buttons.
Press the SET UP button to select the flash speed.
You can select the desired values (
UP/DOWN
~
~
~
~
~
~
~
~
~
~
~
and
~
~
~
~
~
23/27
Sets the slave unit in slave mode
Red intensity
Green intensity
Blue intensity
White intensity
Amber intensity
UV intensity
Strobe speed,
slowest, is fastest
Select from 16 sound controlled programs
Sensitivity setting of the microphone,
the lowest level,
Select from 16 built-in color fade programs
Select from 16 built-in color switch programs
The auto fade and switch program runs in a
continuous loop
Speed settings for auto programs
Select from 63 static colors
Strobe speed,
slowest, is fastest
Display always on
Display off
Display normal
Display inversed
Return to factory setting
Sets the DMX starting address
6 channel mode
7 channel mode
8 channel mode
9 channel mode
) via the UP or DOWN buttons.
Function
is off,
is the highest level
is off,
) can now be
00080993.DOC, Version 1.0
is
is
is