Safety Regulations; Layout And Items Supplied - EINHELL FORTEXXA 18/20 TH Originalbetriebsanleitung

Danger!
When using the equipment, a few safety pre-
cautions must be observed to avoid injuries and
damage. Please read the complete operating
instructions and safety regulations with due care.
Keep this manual in a safe place, so that the in-
formation is available at all times. If you give the
equipment to any other person, hand over these
operating instructions and safety regulations as
well. We cannot accept any liability for damage
or accidents which arise due to a failure to follow
these instructions and the safety instructions.
Explanation of the symbols on the equipment
(Fig. 14):
1. Read the operating instructions.
2. On all jobs performed with the saw, you must
always wear safety goggles to guard your
eyes from fl ying chips/materials/objects and
a sound-proof helmet, ear plugs or the like
to protect your hearing. Always wear a safety
helmet, because there is a risk of objects fal-
ling on you from above.
3. The user must wear tight-fi tting clothing and
protective gear to prevent cuts to the hands,
lower arms, legs and feet.
4. Do not expose the device to rain.
5. Maximum cutting length / chain speed
6. Unlock the chain brake before putting into
operation!
7. Store the battery only in dry rooms with an
ambient temperature of +10°C to +20°C.
Place only charged batteries in storage (charged
at least 40%).
8. The batteries must be removed from the
tool before it is disposed of. How to dispose
of batteries: Batteries are not allowed in
household waste.
9. Always hold the cordless chainsaw fi rmly with
both hands.
10. Kick-back might result in fatal injuries from
cuts.
11. This particular type of power saw is allowed
to be used only for tree care by persons who
are specially trained.
12. Warning! Danger!
Anl_Fortexxa_18_20_TH_SPK13.indb 20
GB

1. Safety regulations

The corresponding safety information can be
found in the enclosed booklet.
Warning!
Read all the safety information, instructions,
illustrations and technical data provided on
or with this power tool. Failure to adhere to the
following instructions may result in electric shock,
fi re and/or serious injury.
Keep all the safety information and instruc-
tions in a safe place for future use.

2. Layout and items supplied

2.1 Layout (Fig. 1-3)
1. Claw stop
2. Front hand guard (chain brake)
3. Front handle
4. Rear handle
5. Safety lock-off
6. On/Off switch
7. Oil tank cap
8. Chain wheel cover
9. Fixing screw for the chain wheel cover
10. Chain tensioning screw
11. Chain oil fi ll level indicator
12. Battery (in the case of Art. No.: 4600020 it is
not included in delivery)
13. Pushlock button
14. Rear hand guard
15. Cutter rail
16. Saw chain
17. Cutter rail guard
18. Charger (in the case of Art. No.: 4600020 it is
not included in delivery)
19. Adapter plate
20. Attachment device for sling
21. Chain catch
Safety functions
16 The specially developed safety features of
the LOW-KICKBACK SAW CHAIN will help
you reduce and absorb the force created by a
kickback.
2 The front hand guard (chain brake) protects
the left hand of the operator if it slips off the
front handle while the saw is running. The
CHAIN BRAKE is a safety function that redu-
ces injuries caused by kickback by stopping a
running saw chain in milliseconds. It is activa-
ted by the front hand guard (chain brake).
- 20 -
23.11.2021 10:19:57