Phases Of The Moon - Hama 00176596 Bedienungsanleitung

7.2 Phases of the moon

• The weather station has a display that automatically shows the current phase of the moon.
7.3 Display of temperature / ambient humidity / air pressure and temperature /
ambient humidity trend
• The current indoor temperature / ambient humidity / air pressure and the temperature / ambient humidity
trend (indoors) are shown on the LCD display.
• Following successful connection to the outdoor sensor, the weather station can display the outdoor
temperature / ambient humidity and the temperature / humidity trend (outdoors).
The following displays may appear:
The temperature / ambient humidity is rising.
The temperature / ambient humidity is remaining constant.
The temperature / ambient humidity is falling.
7.4 Maximum / minimum temperature / relative humidity:
• Press the "MEM" button to toggle between the maximum and minimum temperature and humidity data for
indoors and outdoors:
• Once to display the maximum values for temperature and ambient humidity.
• Twice to display the minimum values for temperature and ambient humidity.
• Three times to return to the current values for temperature and ambient humidity.
• Press and hold the MEM button for around 2 seconds to reset the maximum and minimum temperature and
ambient humidity. This resets all recorded minimum and maximum data to the values shown currently.
Note
• If the temperature value is below the range that the weather station is able to display, "LL.L" appears.
• If the temperature is above the range that the station is able to display, "HH.H" appears.
• If the battery symbol appears, the batteries should be replaced as soon as possible.
7.5 Frost indicator
If the outdoor temperature is between 1°C and 3°C (or 33.8°F and 37.4°F), the frost symbol flashes in the form
of a snowflake.