Assembling Instructions - Spokey Lotus+ Bedienungsanleitung

EN USE'S MANUAL
Thank you for purchasing the Magnetic Bike. Before operating this unit, please read this manual careful-
ly to ensure optimum performance and safety.
1. IMPORTANT
SAFETY INFORMATION
1. Be aware of your body's signals. Incorrect or excessive
exercise can damage your health. If you do experience
any of these conditions you should consult your doctor
before continuing with your exercise program.
2. Keep children and pets away from the equipment.
The equipment is designed for adult use only.
3. Use the equipment on a solid, flat level surface with
a protective cover for our floor or carpet. For safety, the
equipment should have at least 0.5 meter of free space
all around it.
4. Before using the equipment, check the nuts and bolts
are securely tightened. Some parts like pedals, etc. It's
easy to be ware away.
5. Always use the equipment as indicated. If you find any
defective components whilst assembling or checking
the equipment, or if you hear any unusual noise coming
from the equipment during use, stop. Do not use the
equipment until the problem has been rectified.
6. Wear suitable clothing whilst using the equipment.
Avoid wearing loose clothing which may get caught
in the equipment or that may restrict or prevent
movement.
7. The equipment has been tested and certified to EN957
under class H.C. Suitable for domestic,
home use only. Maximum user weight 120 kg.
8. The equipment is not suitable for therapeutic use.
2. NOTICE:
A. Please make sure there has enough space around the
machine before assembly
B. Please use the provided tools or right tools by yourself.
C. Check the parts and the hardware first.
8 | EN | instruction

3. ASSEMBLING INSTRUCTIONS

Step 1 (see fig A):
Secure well Front bottom tube (2) and rear bottom tube
(3) to main frame (1) with screw 4 Spring washer 5 wa-
sher 6.
Step 2 (see fig B):
Lock the left and right pedals (10L / R) on the left and right
pedal weld (9L / R) with bolts (11), washer (6), nylon nuts
(12) and pedal plate (83).
Step 3 (see fig C):
Secure L&R swing rod (29L&R) to main frame (1) with
long axis (49) screw(33) spring washer (32) Washer (31)
D washer (30) lock well Connect metal (25) to L&R Pedal
tube (9L/R)with bolt (26) sleeve (27).
Step 4 (see fig D):
Secure L&R handlebar ((34L/R) to L&R swing rod (29L/R)
with bolt (35) Curved washer (36) Cap Nut (37).
Step 5 (see fig E):
First, insert the mid handlebar weld (39) into the Main fra-
me (1), lock the mid handlebar weld (39) with the screw
(42), and then lock the Middle handrail (86) on the armrest
fixing plate of the mid handlebar weld (39) with the Screw
(87), Curved washer (36) and cap nut (37).
Step 6 (see fig F):
First, connect the monitor line (41) with the Sensor (80)
and the Hand Pulse Sensor (90), then lock the Monitor (41)
on the bracket of the mid handlebar weld (39) with the Bolt
(84), and finally lock the bottle holder (89) on the mid han-
dlebar weld (39) with the screw (92).