Optika Italy OPTIGEM-Serie Bedienungsanleitung Seite 12

6. Insert the jewel clip in one of the three threaded holes on the
stage. (Fig. 5)
Installing the photo port (OPTIGEM-20)
1. Loosen the fixing screws ① of the supplied photo port and
remove the existing photo port. (Fig. 6)
2. Insert the ring of the photo port ② making sure to leave the
fixing screw of the photo adapter ③ facing right. (Fig. 7)
3. Lock the fixing screws ①. (Fig. 6)
Page 12
②
①
F ig. 5 F ig. 5
①
①
F ig. 6 F ig. 6
②
③
F ig. 7 F ig. 7