Remote Control; Updating The Dconnect Box2 - Dab Dconnect Box2 Anleitungen Für Die Installation

ENGLISH
Figure 4: Dconnect APP

11.2 - Remote control

The first step of the procedure is local control of the device. Follow the instructions given in the previous paragraph "LOCAL CONTROL (POINT-
TO-POINT)".
Then, select the button in figure 5 and figure 6 to choose the WiFi network to which the DConnect Box2 will be connected.
On the phone, select the network "dconnectbox2-xxxx" again via phone settings - WiFi.
Once the WiFi network is configured, you need to enable the DAB DConnect Service Centre using the button in figure 7.
Figure 6
Figure 5 Figure 7

12. UPDATING THE DCONNECT BOX2

Before connecting a new product to the DConnect Box2, check whether there are any new updates available.
It is important and recommended to keep your DConnect Box2 always up to date.
Updates are downloaded from the Internet (check your tariff plan).
To allow the update just click and confirm "Update Now".
The update of the DConnect Box2 will take 3-4 min.
Connect the pumps and update them if necessary (see the appropriate section in this manual).
16