Maintenance And Cleaning; Cleaning The Outer Surface Of The Product; Cleaning The Lters - Beko BDSA250K3SN Gebrauchsanweisung

Maintenance and cleaning

6
Service life of the product extends and
frequently faced problems decrease if it is
cleaned at regular intervals.
Unplug the product and turn off
A
the tap before attempting any
cleaning procedures.
C
Do not use abrasive substances
for cleaning.
C Clean the filter and impellers
at least once a week in order
for the machine operates
efficiently.
Clean ng the outer surface
of the product
Wipe the outer surface and door gaskets
of the product gently with a mild cleaning
material and damp cloth. Wipe the "Control
panel" only with a slightly damp cloth.
Clean ng the nter or of the
mach ne
Clean the interior of the machine and
•
the tank by running a programme with
or without detergent based on the
degree of soil.
If water has remained in the machine,
•
drain the water by performing the
procedures under the topic "Canceling
a programme". If the water cannot
be discharged, remove the filters
as specified in the "Cleaning the
filters" section and check if there
are any leftover deposits that have
accumulated at the bottom of the
machine, blocking the water path.
Clean if necessary.
Dishwasher / User's Manual
Clean ng the f lters
Clean the filters at least once a week in
order for the machine operates efficiently.
Check if food residues are left on the filters.
If there are food residues on filters, take
them out and clean well under running
water.
1. Turn the micro filter (1) and coarse filter
(2) assembly counter clockwise and pull
it out from its seating.
2. Pull out the metal/plastic filter (3) from
the seating.
3. Press the two pawls on the coarse filter
inwards and separate the coarse filter
from the assembly.
37 / 45 EN