Herunterladen Inhalt Inhalt Diese Seite drucken

Beko BDSA250K3SN Gebrauchsanweisung Seite 98

Vorschau ausblenden Andere Handbücher für BDSA250K3SN:
Inhaltsverzeichnis

Werbung

Troubleshooting
A smear remains on glasses that resembles milk stain which can not be
removed when wiped by hand. A bluish / rainbow appearance occurs when
the glass is pointed to light.
Excessive rinse aid is used. >>>Lower rinse aid setting. Clean the spilled rinse aid when
adding rinse aid.
Corrosion has occurred on glass due to soft water. >>> Measure the hardness of the
supply water appropriately and check the water hardness setting. If your supply water
is soft (<5 dH), do not use salt. Choose programmes that wash in higher temperatures
(e.g. 60-65°C). You can also use glass protective detergents that are commercially
available.
Foam forms in the machine.
Dishes are washed with hand-wash detergent by hand but not rinsed before placing
them into the machine. >>> Hand-wash detergents do not contain antifoam. There is
no need to hand-wash the dishes before placing them into the machine. Removing the
coarse soil on the dishes under tap water, with a tissue paper or fork will be sufficient.
Rinse aid has spilled into the machine when adding rinse aid. >>> Take care that rinse
aid is not spilled in the machine when you are filling it. Clean any spilled rinse ait with
the help of a tissue paper/towel.
Lid of the rinse aid reservoir is left open. >>> Make sure that the lid of the rinse aid
reservoir is closed after adding rinse aid.
Kitchen utensils are broken.
Dishes are not placed orderly in the machine. >>> Load the dishes as described in the
user manual.
Baskets are overloaded. >>> Do not overload the baskets in excess of their capacity.
Water remains in the dishwasher at the end of the programme.
Filters are clogged. >>> Check if the filter system is clean. Clean the filter system
regularly as illustrated in section "Cleaning and Care".
Discharge hose is clogged/blocked. >>> Check the discharge hose. If necessary,
remove the discharge hose, clear the blockage and insert is as illustrated in the user
manual.
If you cannot eliminate the problem although you follow the instructions in this
C
section, consult your dealer or the Authorised Service Agent. Never try to repair
a nonfunctional product yourself.
44
/45 EN
Dishwasher / User's Manual

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis