Technical Speci Cations - Beko BDSA250K3SN Gebrauchsanweisung

Dishwasher
Techn cal spec f cat ons
Compliance to standards and test data / EC declaration of conformity
This product complies with the following EU directives;
Development, production and sales stages of this product comply with the safety
rules included in all pertaining European Community regulations.
2014/35/EU, 2014/30/EU, 93/68/EC, IEC 60436/DIN 44990, EN 50242
Power input
Total power consumption
Heater power consumption
Total current (depends on the model)
Drain pump power consumption
Water pressure
C
Technical specifications may be changed without prior notice to improve the
quality of the product.
C
Figures in this manual are schematic and may not match the product exactly.
C Values stated on the markings of the product or in the printed documents
accompanying the product are obtained in the laboratory on basis of the
relevant standards. Depending on operational and environmental conditions of
the product, these values may vary.
Fan dry ng system
(depends on model)
Fan drying system ensures efficient drying of your dishes.
It is normal to hear a different sound than that of washing cycle during fan operation.
Note for test institutions:
Data required for performance tests shall be provided upon request. Requests can be
e-mailed to the following address:
dishwasher@standardloading.com
Do not forget to provide the code, stock and serial numbers of the product to be tested in
your request e-mail along with your contact information. Code, stock and serial numbers of
the product may be found on the type label attached to the side wall of the door.
8 /45 EN
220-240 V, 50 Hz (see rating label)
1800-2100 W (see rating label)
1800 W (see rating label)
10 A (see rating label)
30 W (see rating label)
0.3 –10 bar (= 3 – 100 N/cm = 0.01-1.0
Mpa)
Dishwasher / User's Manual