Herunterladen Inhalt Inhalt Diese Seite drucken

Clock Functions - IKEA EFTERSMAK AA-2048505-4 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

ENGLISH

Clock functions

Clock functions table
Clock function
To show or change the
time of day. You can
TIME OF DAY
change the time of day
only when the oven is off.
To set how long the oven
works. Use only when a
DURATION
heating function is set.
To set when the oven
turns off. Use only when a
END
heating function is set.
Combination of DURA‐
TION and END function.
TIME DELAY
Use to set a countdown
time. This function has no
MINUTE MIND‐
effect on the operation of
ER
the oven. You can set the
MINUTE MINDER at any
time, also if the oven is
off.
00:00
If you do not set any other
COUNT UP
clock function the COUNT
TIMER
UP TIMER automatically
monitor how long the
oven works.
The counting starts imme‐
diately when the oven
starts to heat.
The Count Up Timer can‐
not be used with the func‐
tions: DURATION, END.
Setting and changing the time
After the first connection to the mains, wait
until the display shows
flashes.
1. Turn the control knob to set the hours.
2. Press
to confirm and set the minutes.
Application
and "12:00". "12"
The display shows
"00" flashes.
3. Turn the control knob to set the current
minutes.
4. Press
to confirm or the set time of
day will be saved automatically after 5
seconds.
The display shows the new time.
To change the time of day press
and again until the indicator for the time of
day
flashes in the display.
Setting the DURATION function
1. Set a heating function. Press
confirm.
2. Press
again and again until
to flash.
3. Turn the control knob to set the minutes
and press
to confirm. Turn the control
knob to set the hours and press
confirm.
When the set Duration time ends the signal
sounds for 2 minutes.
flash in the display. The oven turns off
automatically.
4. Press any button or open the oven door
to stop the signal.
5. Turn the knobs to the off position.
This function is not available for some oven
functions.
Setting the END function
1. Set a heating function. Press
confirm.
2. Press
again and again until
to flash.
3. Turn the control knob to set the hours
and press
to confirm. Turn the control
knob to set the minutes and press
confirm.
14
and the set hour.
again
to
starts
to
and time setting
to
starts
to

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis