KERN PCB Serie Betriebsanleitung Seite 112

GB
Table of Contents
1 Technical data __________________________________________________ 3
2 Declaration of conformity ________________________________________ 8
3 Basic Information (General)_______________________________________ 9
3.1 Proper use _______________________________________________________ 9
3.2 Improper Use ____________________________________________________ 9
3.3 Warranty ________________________________________________________ 9
3.4 Monitoring of Test Resources ______________________________________ 10
4 Basic Safety Precautions ________________________________________ 10
4.1 Pay attention to the instructions in the Operation Manual_______________ 10
4.2 Personnel training _______________________________________________ 10
5 Transport and storage __________________________________________ 10
5.1 Testing upon acceptance _________________________________________ 10
5.2 Packaging ______________________________________________________ 10
6 Unpacking, Setup and Commissioning ____________________________ 11
6.1 Installation Site, Location of Use ___________________________________ 11
6.2 Unpacking ______________________________________________________ 11
6.2.1 Setup ______________________________________________________________ 11
6.2.2 Scope of delivery _____________________________________________________ 12
6.3 Mains connection ________________________________________________ 12
6.4 Operation using a (rechargeable) battery (optional) ____________________ 12
6.5 Connection of peripheral devices ___________________________________ 13
6.6 Initial Commissioning ____________________________________________ 13
6.7 Adjustment _____________________________________________________ 13
6.8 Adjustment _____________________________________________________ 13
6.9 Underfloor weighing______________________________________________ 14
7 Operation _____________________________________________________ 15
7.1 Overview of display ______________________________________________ 15
7.2 Weighing _______________________________________________________ 15
7.3 Taring__________________________________________________________ 16
PCB-BA-e-0712
KERN PCB
Version 1.2 12/2007
Operating instruction
Precision balance
1