9.1
Select tempera-
ture unit °C/°F
Fig. 8: Select the temperature unit
9.2
Set the CO
thresholds
9.2.1
Good range
The temperature unit °C or °F flashes in the dis-
play.
(default setting: °C)
Press the ▲-button to select the desired tem-
•
perature unit.
Confirm your selection with the ●-button or the
•
Ξ button.
alarm
The menu for setting the alarm thresholds will
2
open.
The Wöhler IQ 300 measures the actual CO
centration and rates the indoor air quality on this
basis with 3 criteria:
good, normal, poor
The states are indicated by three different smi-
leys, as well as by a traffic light indicator, cf. Fig. 3
The preset limit values for the respective CO
ranges can be changed as follows:
You first enter the mode for setting the good
range.
Preset upper limit: 700 ppm
Setting range: 0 – 9.800 ppm
Table des matières
con-
2
2
45
EN