Hold Measurement - Wohler IQ 300 Bedienungsanleitung

8

Hold measurement

Fig. 6: Hold mode
With the measurement view active, press the
•
Ξ key a second time to enter hold mode.
• „Hold" flashes in the upper left corner of the
display.
Press the ▲-key to display the four frozen
•
measured values (CO
tive humidity) one after the other in the main
display.
• Press the ● key to exit the hold mode and
return to the measurement view.
or
Press the Ξ-key to exit the hold mode and
•
enter the general settings menu.
Table des matières
, temp., dew point, rela-
2
EN
43