Cleaning And Polishing; Marking; Operation; Initial Operation - GREISING Clean Marker Brush-IT Bedienungsanleitung

4 SETTING UP
4.1 PREPERATION FOR WORK
4.1.1 Putting the machine into operation for pickling/cleaning and
polishing
• check that the main voltage is the same as that on the type label and is
the same as the setting
• using the mains cable connect the unit to the mains voltage
push the earth cable (10 mm
• fix the earth clamp on the workpiece
• push the working cable (10 mm
• fix the other end of the cable into the brush or elcetrode tool
• switch on the unit at the main switch
be lit, the unit is ready.
4.1.2 Putting the machine into operation for marking
• check that the mains voltage is the same as that on the type label and is
the same as the setting
• using the mains cable connect the unit to the mains voltage
push the red earth cable (2,5 mm
• fix the earth clamp on the workpiece
• push the black working cable (2,5 mm
• fix the other end of the cable into the grey handle
• switch on the unit at the main switch
be lit, the unit is ready.
5

OPERATION

5.1 INITIAL OPERATION

Carry out a check and inspection, not only prior to initial operation, but also
prior to every set up. Set up the unit as described above.
Working with chemicals can be dangerous. Always wear a face mask,
acid-proof apron, goggles and gloves. When using Greinox 1000 / 2000 /
Polish, Rapid please read the Safety Data Sheets first (currently to be
found under www.greising.com / Clean Marker /Service).
Do not inhale the vapours arising. Should there be skin contact, wash with
plenty of water.
5.1.1 CONNECTING UP THE AUTOMATIC ELECTROLYTE FEED ON-
CLEAN MARKER P AND CLEAN MARKER TP
• plug the black plug belonging to the pump tubing set into the connecting
socket
8
• push the acid tubing so far into the connection of the bulk head stuffing
box
10
Operation Manual Clean Marker Brush − Page 29
) into the socket
9
2
8
) into the socket
2
B , the green light
) into the socket. 3
2
) into the black socket
2
, the green light
B
6 should
1
should
2
- -
29